Safety Vision to Samsara Analog Camera-Monitor Connector Adapter Cable
![Safety Vision to Samsara Analog Camera-Monitor Connector Adapter Cable Safety Vision to Samsara Analog Camera-Monitor Connector Adapter Cable](https://s.turbifycdn.com/aah/videoware/safety-vision-to-samsara-analog-camera-monitor-connector-18.jpg)
Safety Vision to Samsara Analog Camera-Monitor Connector.
This adapter cable allows you to connect certain Safety Vision Cameras to Samsara's ACC-CM-ANLG adapter that allows connection of standard definition cameras and a monitor to the Samsara VG54 Gateway. The VG54 Gateway connects to Samsara's Dashcam system.
This cable has the following connectors:
One Female RCA connector for the video signal from the camera. The Female RCA connector connects to the Male RCA Video-In connector on the ACC-CM-ANLG adapter.
One GX14 4-Pin Male Connector that connects to the Safety Vision GX14 4-Pin Female connector from the Safety Vision monitor or the monitor's extension cable.
One GX14 4-Pin Male Connector that connects to the power connector (or extension cable) to power the camera.
One GX14 4-Pin Female Connector that connects to the camera or the camera's extension cable.
Note: This breakout cable is required since the Samsara ACC-CM-ANLG adapter does not power the Safety Vision Camera. The adapter allows you to provide power to the camera via the monitor/power connector and then output the video to a female RCA adapter. This cable can also be used to connect to DVRs that have BNC connectors, just order the optional BNC adapter.