MultiView II DVI-Rx 1k SAP Receiver

MultiView II DVI-Rx-1k-SAP Receiver, duplex addressable serial with skew compensation.

Compatible with
• MultiView II DVI Transmitter # 2620063-02
• MultiView II DVI-SAP Transmitter # 2620066-02
• Mondo Matrix III 16x16 Switch # 222R3001-16x16 and other Mondo Matrix Switchers

The MVII-DVI-Rx is a video receiver that is compatible with the MVII-DVI-Tx transmitter and Mondo Matrix. It extends a high resolution video signal over standard CAT5 cable (or CAT5e, CAT6 or CAT6a). There are user-configurable settings for video, audio, and serial options which can be controlled from the front panel.

The MVII-DVI-Rx features automatically adjusted EQ and Skew compensation, greatly simplifying the initial installation and setup. These adjustments can also be fine-tuned manually. The skew compensation can be varied in 2 ns increments to 65 ns total per color-channel to cancel the effects of skew in Category cables. This feature allows you to use a variety of UTP cables (both “normal” and “minimized-skew” types) to lengths up to 1000ft (305m).

Key Features of the MultiView IIj DVI Receiver with SAP
• Compatible with MultiView II DVI-TX
• Compatible with Magenta_s Mondo Matrix switching platform
• Compatible with most Multiview signal distribution accessories
• Works with most HDMI sources and displays with resolutions up to 1080p
• Configuration is automatic
• Can be daisy-chained with up to 12 MV II DVI-RX-1K Receivers on each 1000ft run

Specifications:
• Cable Required Category 5, 5e, 6 cable. Shielded or unshielded twisted pair. Low-skew.
• Compliance CE, FCC Class A, IC Class / Class A, UL listed I.T.E Device, RoHS.
• Video Support DVI-D, and HDMI by using a connector adapter.
• Resolution & Refresh Rate Established timings: 640x480@60Hz 800x600@60Hz 1024x768@60Hz 1280x1024@60Hz 1360x768@60Hz 1600x1200@60Hz 1680x1050@60Hz 1920x1080@60Hz 1920x1200@60Hz
• Detailed timings: 1920x1080@60Hz
• CEA video formats:
720x480p@(59.94,60Hz)@4:3 720x576p@50Hz@4:3 1280x720p@50Hz@16:9 1280x720p@(59.94,60Hz)@16:9 1920x1080p@50Hz@16:9 1920x1080p@(59.94,60Hz)@16:9 Specific timings 1280x720@60Hz 720x480@59.94Hz 1920x1200@59.94Hz
• Video-Output: Standard DVI-D interface specifications apply. DDC/EDID is supported.
• Standard auxiliary Signals (including -A and _S versions): L+R summed audio input: 47K ohms input impedance. A source device with 600 ohms maximum output impedance is recommended.(analog audio input mode).
• Interface Signal Details:
• SPDIF input: 75 ohms input impedance (S/PDIF input mode).
• Duplex SAP option module: Stereo L/R audio input: 10K ohms input impedance. A source device with 600 ohms maximum output impedance is recommended.
• RS-232 input: 4.75K ohms input impedance.
• Local-output Port Drive Impedance Standard DVI interface specifications apply (at local video-output port). DDC/EDID is supported.
• Audio Characteristics
• Standard (A) version: Left+Right summed audio.
• SAP version: Left/Right true stereo audio.
• Embedded digital audio is supported.
• * For summed L+R analog-audio input, please select the 4th-pair configuration setting accordingly.
• * For stereo analog-audio input, please use SAP option module.
• Connectors Standard connectors: (1) DVI-female: Video out (1) RJ-45: MultiView CAT5 link input/output (1) 4 position phoenix: Auxiliary signal output (1) Coaxial (5.5mm OD, 2.5mm ID, 11mm L) jack: DC power input
• For SAP version: (1) DB9-F: Serial I/O
• EDID/DDC This module supports the EDID/DDC connections on the DVI-I connectors.
• HDMI It is usually possible to connect to HDMI devices (via a plug-adapter or cable-adapter)
• Embedded HDMI audio is not supported
• CEC Not supported, even if a "HDMI-to-DVI" plug-adapter or cable-adapter is used.
• Power Input voltage: +5 VDC @ 1.2 Amps max.
• Consumption: 6 watts maximum
• Environmental Operating temperature: 32 to 104_F (0 to 40_C).
• Storage temperature: -4 to +140_F (-20 to +60_C).
• Humidity: 80% RH, non-condensing.
• Enclosure Steel (0.040_/1mm thick).
• Powder-coat black paint, white epoxy graphics.
• Size 1.2"H x 4.2"W x 4.3"D (3.1 x 10.4 x 10.9 cm)
• Weight 1.0 lb. (0.45 kg)
• MTBF 100,000 hours.