1ft RapidRun Multi-Format Runner Cable (Orange) Test Adapter Cable
Product Code: SV-60113a- RapidRun is known for its versatility, convenience and ease of installation, however, even the most experienced installers will run into hazards that damage or kink the cable during installation
- Problems associated with installation damage are seldom found until the final phase of the installation when the cable is already enclosed in the wall
- Color-coded orange for use with RapidRun Multi-Format runners, this test adapter allows for a continuity test of the Multi-Format runner to ensure proper functionality before leaving the job site
- This test adapter includes two pieces: a modified RapidRun connector that connects to the display end of the runner, and an RJ45 adapter cable that connects to source end of the runner and to the input of a common network cable tester
- Please see our selection of network cable testers ("https://www
- svideo
- com/category/tools-testers/cable-testers/network-cable-testers")
- Instructions For Use: * Connect the modified RapidRun connector to the display end of the Multi-Format runner cable
- * Connect the RJ45 adapter cable to the source end of the Multi-Format runner cable
- * Connect a network tester to the RJ45 adapter cable
- * Run a continuity test with the network tester
- * A runner cable with proper continuity will produce a short on pins 4 and 5 in the readout from the network testerIf any other result is produced on the runner, then please contact customer service at 1-800-506-9607