1ft RapidRun Multimedia Runner Cable (Blue) Test Adapter Cable
Product Code: SV-42119a- RapidRun is known for its versatility, convenience and ease of installation
- However, even the most experienced installers will run into hazards that damage or kink the cable during installation
- Problems associated with installation damage are seldom found until the final phase of the installation when the cable is already enclosed in the wall
- Color-coded blue for use with RapidRun Multimedia runners, this test adapter lets an installer run a quick continuity test of the Multimedia runner to ensure proper functionality BEFORE the installer leaves the job site
- This test adapter includes two pieces: a modified RapidRun connector that connects to the display end of the runner, and an RJ45 adapter cable that connects to the input of a common network cable tester
- Please see our selection of network cable testers ("https://www
- svideo
- com/category/tools-testers/cable-testers/network-cable-testers")
- Instructions For Use: * Attach the modified RapidRun connector to the display end of the Multimedia runner cable
- * Connect the network tester to the source end of the runner cable using the RJ45 adapter cable
- * Run a continuity test on the cable
- * Pins 4 and 5 should show as a short on the test readout
- * If you do not get this readout, please contact your RapidRun sales representative for assistance, or call customer service at 1-800-506-9607