HDMI Audio De-Embedder
Product Code: SV-40695a- The C2G HDMI Audio De-Embedder will split the audio from HDMI video and convert it to Toslink, Digital RCA, or a 3,5mm Stereo Audio signal to support an audio system that is separate from the display
- The de-embedder will allow HDMI video to continue to the television or monitor while supplying audio to an audio system near the HDMI source
- This device is ideal for projector installations where the projector does not provide an audio output and the system design calls for the use of an amplified audio reinforcement system
- The HDMI Audio De-Embedder provides the means to separate the audio from the HDMI signal and provide that audio to the amplifier
- Setup is easy with minimal configuration time
- Simply connect the HDMI and audio cables and power on the system
- The HDMI Audio De-Embedder features two audio modes, A and B
- When set to Mode A, the de-embedder will allow EDID signals to pass-through between source and display which will automatically set the audio output to the best common digital audio performance level
- When set to Mode B, the de-embedder allows the digital audio output of the source to be set independently of the capabilities of the display
- In both Modes, A and B, the digital audio must be output through the Toslink or RCA port of the de-embedder
- The 3,5mm output of the de-embedder requires that the source be set to the PCM audio mode
- Note: Digital signals, such as Dolby Digital and DTS audio, from the source device are supported through the Toslink and Digital RCA port
- The 3,5mm port supports PCM audio signals from the source device
- The source device must be set to a PCM audio mode to use the 3,5mm audio output
- * Download a version of the technical specifications of this product on the Support tab * Download a version of the manual from the Support tab