VGA and Stereo Audio and Serial RS232 over Cat5 Extender Aluminum Wall Plate Transmitter to Box Receiver Kit - 500ft
Product Code: SV-29399a- The TruLink VGA + Stereo Audio + Serial RS232 over Cat5 kit is a complete solution for extending VGA video, Stereo Audio and Serial RS232 signals over two Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 500ft at a 1920x1200 resolution*
- This solution is compatible with any operating system and is truly plug and play with no drivers or software required
- The transmitter and receiver are available in either a wall plate or box form factor and are interoperable allowing this solution to meet the needs of the installation environment
- In addition, this solution utilizes TruChoice(TM) power providing the flexibility to power at either the transmitter or receiver end
- TruPair(TM) technology allows the Extended Display Identification Data (EDID) signals, i
- e
- communication of the display_s capabilities, to be communicated, ensuring that the content from the source is sent at the optimal resolution for the display
- Built-in power surge protection and high ground loop immunity ensure high performance signal extension
- The DB9 Serial RS232 port supports full-duplex data communication at 230Kbps and is fully compatible with all RS232 protocols
- Point-to-point or multi-drop data communication is supported
- *Longer distances can be achieved at lower resolutions
- Note: Stranded Cat5e/6 cables may be used for extension applications up to 250ft
- Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments
- For best performance use a Cat6 Solid Shielded Patch Cable ("https://search
- svideo
- com/?N=0&Ntt=43122%20and%2043123%20and%2043124&p=e") * Download the manual from the Support tab * Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab