300ft VGAand3.5mm AudioandSerial RS232 over Cat5 Box Transmitter/Wall Plate Receiver Kit - Aluminum

The TruLink VGA + Stereo Audio + Serial RS232 over Cat5 kit is a complete solution for extending VGA video, Stereo Audio and Serial RS232 signals over two Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 300ft at a 1920x1200 resolution*. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice(TM) power providing the flexibility to power at either the transmitter or receiver end. TruPair(TM) technology allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display_s capabilities, to be communicated, ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension. The DB9 Serial RS232 port supports full-duplex data communication at 230Kbps and is fully compatible with all RS232 protocols. Point-to-point or multi-drop data communication is supported.*Longer distances can be achieved at lower resolutions.Note: Stranded Cat5e/6 cables may be used for extension applications up to 250ft. Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable ("https://search.svideo.com/?N=0&Ntt=43122%20and%2043123%20and%2043124&p=e") * Download the manual from the Support tab *