VGA over Cat5 Extender Box Transmitter
Product Code: SV-29362a- The TruLink VGA over Cat5 allows a VGA video signal to be extended over a single Cat5/Cat5e/Cat6 unshielded twisted pair cable up to 300ft at up to a 1920x1200 video resolution
- The transmitter and receiver are available in either a wall plate or box form factor and are interoperable allowing this solution to meet the needs of the installation environment
- In addition, this solution utilizes TruChoice(TM) power providing the flexibility to power at either the transmitter or receiver end
- TruPair(TM) technology allows the Extended Display Identification Data (EDID) signals, i
- e
- communication of the display_s capabilities, to be communicated, ensuring that the content from the source is sent at the optimal resolution for the display
- Built-in power surge protection and high ground loop immunity ensure high performance signal extension
- View compatible receivers, additional transmitters and kit options on the VGA over Cat5 Product Family Sheethttps://www
- svideo
- com (/docs/matrices/C2G_AVOCmatrix_VGA
- pdf)*Longer distances can be achieved at lower resolutions
- Note: Stranded Cat5e/6 cables may be used for extension applications up to 250ft
- Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments
- For best performance use a Cat6 Solid Shielded Patch Cable ("https://search
- svideo
- com/?N=0&Ntt=43122%20and%2043123%20and%2043124&p=e") * Download the manual from the Support tab * Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab