USB 1.1 Over Cat5 Superbooster Extender Dongle Kit for Interactive Whiteboards
Product Code: SV-29338a- One of the only solutions on the market designed and engineered for compatibility with interactive whiteboard (IWB) models*, the new USB 1
- 1 Superbooster Extender for Interactive Whiteboards is perfect for extending 1
- 1 signals up to 40m (131ft) to support interactive whiteboards
- Other USB extension solutions use a chipset that is incompatible with interactive whiteboards which can cause dropped signals and/or periodic spikes when the solutions are used together
- Our Superbooster allows USB length limitations to be conquered and the interactive whiteboard to be installed in the best location
- The booster is powerful yet simple, with no drivers to install or special software required, so it's compatible with any computer that supports USB
- This plug-and-play device consists of a dongle transmitter unit and receiver unit connected together by a standard Cat5, Cat5E, or Cat6 network cable (not included)
- Simply connect a USB cable from the IWB to the receiver; connect a Cat5 cable from the receiver to the transmitter, then connect the transmitter to an available USB port on the computer and the system is up and running
- Bus-powered, it requires no external power source
- Instead, the Superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device so no external power is required for either the base or remote units
- Compliant with USB Specification 1
- 1
- *Please Note: Promethean recently made a change to the chipset used in its 300 and 500 series interactive whiteboards
- This change has created an incompatibility that prevents audio from being carried by this USB extension solution
- If an application requires the use of the integrated speakers of the Promethean 300 or 500 series interactive whiteboard, then we recommend the use of our 3,5mm Stereo Audio cables ("https://search
- svideo
- com/?N=4294966088+4294965924+21014&Ntt=stereo+audio&Ne=20000&vno=12&Ns=p_length%7C1") to carry the audio signal
- If the application uses an audio system separate from the interactive whiteboard speakers, then this solution will work without any negative performance issues
- The power demands of IWB models may require the use of external power for proper operation
- Please consult with your device manual or manufacturer for details
- During installation, do not connect the transmitter to the PC until all other connections in the system have been made
- The other connections in this system would include the Cat5e/6 cable between the transmitter and receiver and the USB connection between the IWB and receiver