HDMI HDBaseT and VGA over Cat5 Extender Double Gang Wall Plate Transmitter - Aluminum
Product Code: SV-29296a- The HDMI + VGA over Cat5 allows for the extension of HDMI video and audio and VGA video signals over two Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 300ft
- HDMI video is supported at up to a 1080p video resolution while VGA is supported at up to a 1920x1200 resolution*
- HDMI digital audio is supported through the HDMI port
- This solution is compatible with any operating system and is truly plug and play with no drivers or software required
- In addition, this solution utilizes TruChoice(TM) power providing the flexibility to power at either the transmitter or receiver end
- This transmitter requires the use of two separate receivers, one for the HDMI portion and one for the VGA portion
- TruPair(TM) technology and HDBaseT** ensure compatibility with any monitor
- Built-in power surge protection and high ground loop immunity ensure high performance signal extension
- View compatible receivers, additional transmitters and kit options on the HDMI and VGA over Cat5 Product Family Sheethttps://www
- svideo
- com (/docs/matrices/C2G_AVOCmatrix_HDMI_VGA
- pdf)*Longer distances can be achieved at lower resolutions, **TruPair technology with EDID copy is available on the analog portion while HDBaseT supports HDCP and EDID pass-through on the digital portion
- Note: Stranded Cat5e/6 cables may be used for HDMI extension applications up to 250ft
- Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments
- For best performance use a Cat6 Solid Shielded Patch Cable ("https://search
- svideo
- com/?N=0&Ntt=43122%20and%2043123%20and%2043124&p=e") * Download the manual from the Support tab * Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab