HDMI HDBaseT over Cat5 Extender Four Port Box Transmitter
Product Code: SV-29275a- The HDMI over Cat5 Four Port transmitter allows HDMI audio/video signals to be extended over Cat5/Cat5e/Cat6 unshielded twisted pair cables to up to four displays at up to 300ft at a 1080p resolution
- Up to sixteen displays may be supported when using additional transmitters and receivers
- The Uses tab of this page shows an example of daisy-chaining two of these transmitters to support eight receivers/displays
- This solution is compatible with any operating system and is truly plug and play with no drivers or software required
- The receivers are available in either a wall plate or box form factor and are interoperable with this transmitter allowing this solution to meet the needs of the installation environment
- In addition, this solution utilizes TruChoice(TM) power providing the flexibility to power at either the transmitter or receiver end
- HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i
- e
- communication of the display_s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display
- Built-in power surge protection and high ground loop immunity ensure high performance signal extension
- The 4-Port HDMI over Cat5 Box Transmitter features buttons on the front of the unit that allow the content to the connected receivers and displays to be temporarily disabled
- The ports may be disabled individually as a button is provided for each of the Cat5 output ports
- This feature allows the user to edit content through a monitor connected to the local HDMI output of the transmitter without displaying content at the remote locations
- HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i
- e
- communication of the capabilities of the display, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display
- The 4-Port HDMI over Cat5 Box Transmitter features four different modes of EDID communication to provide the best performance for the connected displays
- The auto sync mode is ideal for situations where the displays are of the same make and model, or where the displays have identical performance characteristics
- The three manual sync modes, Audio only, Video only and Audio and Video, utilize the EDID copy feature of the transmitter to store and use EDID information from a single monitor
- This is ideal for situations where displays with different performance characteristics will be used
- Copying and using the EDID information from the display with the lowest performance level will ensure that all displays are capable of receiving a signal
- The LED lights on the front of the transmitter provide the communication status of the connected receivers and displays
- Information on the LED lights can be found on the Specs tab of this page
- View compatible receivers, additional transmitters and kit options on the HDMI over Cat5 Product Family Sheethttps://www
- svideo
- com (/docs/matrices/C2G_AVOCmatrix_HDMI
- pdf)Note: Stranded Cat5e/6 cables may be used for HDMI extension applications up to 250ft
- Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments
- For best performance use a Cat6 Solid Shielded Patch Cable ("https://search
- svideo
- com/?N=0&Ntt=43122%20and%2043123%20and%2043124&p=e") * Download the manual from the Support tab * Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab