HDMI HDBaseT and VGA and Stereo Audio and Composite Video and Audio over Cat5 Extender Double Gang Wall Plate Transmitter - Aluminum
Product Code: SV-29231a- The HDMI + VGA + Stereo Audio + Composite Video + Audio over Cat5 allows for the extension of HDMI video and audio, VGA video, Stereo Audio, Composite Video and Audio signals over three Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 300ft
- HDMI video is supported at up to a 1080p video resolution while VGA is supported at up to a 1920x1200 resolution* and Composite Video is supported at a 480i video resolution
- HDMI digital audio is supported through the HDMI port, while the 3,5mm port supports Stereo Audio and the two RCA Audio inputs of the transmitter accept a Stereo Audio input, mix the two channels of audio into a single signal which is sent to this receiver then duplicated so that both channels of audio are sent to the white and to the red RCA output ports on the receiver
- This solution is compatible with any operating system and is truly plug and play with no drivers or software required
- In addition, this solution utilizes TruChoice(TM) power providing the flexibility to power at either the transmitter or receiver end
- This transmitter requires the use of two separate receivers, one for the HDMI portion and one for the VGA portion
- TruPair(TM) technology and HDBaseT** ensure compatibility with any monitor
- Built-in power surge protection and high ground loop immunity ensure high performance signal extension
- View compatible receivers, additional transmitters and kit options on the HDMI and VGA over Cat5 Product Family Sheethttps://www
- svideo
- com (/docs/matrices/C2G_AVOCmatrix_HDMI_VGA
- pdf)*Longer distances can be achieved at lower resolutions, **TruPair technology with EDID copy is available on the analog portion while HDBaseT supports HDCP and EDID pass-through on the digital portion
- Note: Stranded Cat5e/6 cables may be used for HDMI extension applications up to 250ft
- Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments
- For best performance use a Cat6 Solid Shielded Patch Cable ("https://search
- svideo
- com/?N=0&Ntt=43122%20and%2043123%20and%2043124&p=e") * Download the manual from the Support tab * Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab