HDMI HDBaseT over Cat5 Extender Single Gang Wall Plate Transmitter - Aluminum
Product Code: SV-29223a- The HDMI over Cat5 allows HDMI audio/video signals to be extended over a single Cat5/Cat5e/Cat6 unshielded twisted pair cable up to 300ft at a 1080p resolution
- This solution is compatible with any operating system and is truly plug and play with no drivers or software required
- The transmitter and receiver are available in either a wall plate or box form factor and are interoperable allowing this solution to meet the needs of the installation environment
- In addition, this solution utilizes TruChoice(TM) power providing the flexibility to power at either the transmitter or receiver end
- HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i
- e
- communication of the display_s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display
- Built-in power surge protection and high ground loop immunity ensure high performance signal extension
- View compatible receivers, additional transmitters and kit options on the HDMI over Cat5 Product Family Sheethttps://www
- svideo
- com (/docs/matrices/C2G_AVOCmatrix_HDMI
- pdf)Note: Stranded Cat5e/6 cables may be used for HDMI extension applications up to 250ft
- Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments
- For best performance use a Cat6 Solid Shielded Patch Cable ("https://search
- svideo
- com/?N=0&Ntt=43122%20and%2043123%20and%2043124&p=e") * Download the manual from the Support tab * Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab